|
WinPAC-8000 controllers
WinPAC-8000 is the second generation PAC of ICP DAS. It equips
PXA270 CPU (520MHz) running a Windows CE .NET 5.0 operating
system, variant connectivities (VGA, USB, Ethernet, RS-232/485)
and 1/4/8 slots for high performance parallel I/O modules (high
profile I-8K series) and serial-type I/O modules (high profile
I-87K I/O modules).
Its operating system,Windows CE 5.0, has many advantages,
including hard real-time capability, small core size, fast boot
speed, interrupt handling at a deeper level, achievable
deterministic control and low cost. Using Windows CE 5.0 in the
WinPAC-8000 gives it the ability to run PC-based Control
software such as Visual Basic.NET, Visual C#, Embedded Visual
C++, SCADA software, Soft PLC …etc.
WP-8131 - WinPAC controller
1 slot
Operating temp: -25 C ~ +75 C
Capacity: 1.0A, 5V supply to CPU and backplane,
0.6A, 5V supply to I/O expansion slots, total 8 W
Consumption: 7.3 W (0.3 A @ 24 VDC)
Dimensions: 95mm x 132mm x 111mm
read more
4 slots
Operating temp: -25C ~ +75C
Capacity: 1.1A, 5V supply to CPU and backplane, 4.9A, 5V supply to
I/O expansion slots, total 30 W
Consumption: 9.1W (0.38A @ 24VDC)
Dimensions: 231mm x 132mm x 111mm
read more
WP-8831 - WinPAC controller
8 slots
Operating temp: -25 C ~ +75 C
Capacity: 1.2A, 5V supply to CPU and backplane, 4.8A, 5V supply to
I/O expansion slots, total 30 W
Consumption: 9.6W (0.4A @ 24 VDC)
Dimensions: 355mm x 132mm x 111mm
read more
|
I-7561, USB to
RS-232/422/485 converter
Full speed with USB
1.1/2.0 specifications.
Input: USB protocol.
Output:
RS-232/422/485 protocol.
Speed: “Self Tuner” inside
3000 Vdc isolation protection
provided.
256 modules max. in one
RS-485 network without repeater.
2048 modules max. in one RS-485 network
with repeater.
Repeater request: 4,000 feet or over 256 modules.
Plug-and-play installation.
The I-7561 gets the power from USB port;
no need external power supply
Windows 98/ME/2000/XP and Linux
drivers supported. Driver for other operating
system are currently under development
 The
I-7550 converter is specially designed for the slave device of PROFIBUS DP
protocol. It offers RS-232, RS-422, and RS-485 three kinds of communication
way.
With the Hybrid COM 1 design, users can readily choose one type of com port
to use.
By using this module, users can put their RS-232/422/485 devices into
PROFIBUS network very easily.
 IThe
I-2541 is an RS-232/422/485 to fiber optic converter that ensures data
transmission security by using fiber optic transmission technology to
provide immunity from EMI/RFI interference.
The I-2541 is designed for
RS-232/422 point-to-point connections and
RS-485 multi-drop applications which require a signal to be transmitted
for distances of up to 2Km (6,600 ft), and is a perfect solution in
applications where transmission must be protected from electrical
exposure, power surges, lightning strikes or chemical corrosion.
|
О каталоге
November - NX Dynamics interface
